The PoE switch, the video recorder and the edge server, on one small board. Run the recording software you already use, on your own network, with no Exaviz account and no Exaviz cloud.
Designed by our team in Noblesville, Indiana.
One board per camera site in place of a PoE switch, a recorder box and a small server. Less to buy, mount, power and support.
What changes for integratorsAn NVR, a NAS or a Home Assistant server on a Compute Module, with PoE cameras plugged straight into the board.
See the boardsWe design custom carrier boards, firmware and Linux drivers for product companies that need hardware shaped to their device.
Custom boardsPoE camera power, network switching, storage and compute share one board. Your VMS runs on the same Compute Module.
Video, storage and switching stay on your network. The board needs no Exaviz account and no Exaviz cloud.
Raspberry Pi OS, Debian 12 or 13 or Ubuntu 25.10 or 26.04 LTS, with our packages from apt.exaviz.com (the Banana Pi CM4 runs the Exaviz OS image). Bring the recording software you already know.
An all-in-one NVR, edge computer and PoE controller for the Raspberry Pi CM5.
Turn a Compute Module into a NAS or NVR, and move from a CM4 to a CM5 on the same board.
Prices are board only. Compute modules are sold separately. See all products, cases and power supplies.
See how Cruiser and Interceptor replace the switch, the recorder and the server at a site.
Cruiser
Switch, recorder storage and compute on one board. Plug cameras into the PoE+ ports, record to SATA or NVMe and run the VMS you choose.
Read the post: The DeskPi 2U Case: A Purpose-Built Home for the Cruiser
Interceptor
Run the recorder on your own board. Video, storage and switching stay on your network, with no Exaviz account and no Exaviz cloud.
Cruiser
Put a Hailo-8 accelerator in the M.2 slot and run detection next to the cameras, on a Raspberry Pi CM5, without sending video off site.
Coming soon, free with Exaviz boards: PoE port control, port groups, paired boards in one fleet view, storage usage at a glance and config drift alerts. No account and no cloud, and we stay out of your video.
Exaviz Management won't record, store or stream video. Keep the recording software you already use. We manage the board.
It will run on your local network over HTTPS, with no Exaviz account. One board in a lab or several paired on the same network.
You'll be able to turn PoE ports on and off, group ports, pair boards into one fleet view and see how full storage is, with config drift alerts and an audit log of changes.
Exaviz Management won't collect any information about you or your network.
Coming soon. Want to hear when it's ready? Sign up for announcements.
Our Home Assistant plugin puts your PoE ports on your dashboard. See live power draw per port and what is plugged in, switch ports on or off and power-cycle a stuck camera with one tap. Install it from HACS and run Home Assistant on the board itself: Cruiser, or Interceptor with the PoE Board.
New: Zigbee mode for Cruiser's built-in ESP32-C6 radio. Choose PoE + Wi-Fi/Bluetooth or PoE + Zigbee, on Cruiser Full, Lite, and Keel. Install it with sudo apt install exaviz-tools, then sudo exaviz-flash zigbee, and add Zigbee Home Automation (Ziggurat radio) in Home Assistant 2026.7 or later. Home Assistant connects over your network and does not need to run on the board. Undo with sudo exaviz-flash stock. An antenna is required.
Specs, setup guides and FAQs for Cruiser and Interceptor, plus a Cruiser power calculator, are on exa-pedia.com.
Read the docsPower cameras on 8 PoE+ ports, run your own VMS, and record to RAID storage, all on one Interceptor board in a 1U case. No vendor cloud in the middle.
One Board for an 8-Camera Site: The Interceptor as Switch, Recorder, and StorageTalk to us about volume orders and custom versions.