48Vdc Power Converter

A VOITA 48Vdc Power Converter is a necessary add-on for the Interceptor PoE Board to provide power to connected PoE devices when it is used with an Interceptor Carrier Board. On a Cruiser, the Cruiser powers the PoE Board directly and no converter is needed.  It uses a PSU's +12V 4+4pin connector (requires removal of the PSU's 4+4pin connector or an adapter provided by Exaviz) to convert 12Vdc to 48Vdc.

Each Power Converter Module can supply power for:

• one Interceptor PoE Board (8 ports at 30W each)

• two Interceptor PoE Boards (16 ports at 15W each)

Power is supplied to second Interceptor PoE Board via FFC cable.

Important Note:

1. You may choose to use our provided adapter to connect the 4+4pin CPU power connector from your PSU to power the 48Vdc Power Convertor, or you will need to remove the 4+4pin connector so the wires can be exposed and used.  We provide two additional wire connectors that should be used to connect the exposed CPU 4+4pin power and ground wires, coming from the PSU, to the 48Vdc Power Converter.

2. This VOITA power converter has been verified to work with PSUs validated by Exaviz for the Interceptor Carrier Board (except PicoPSUs, which have not yet been fully tested) as well as all Flex PSUs sold by Exaviz.

Specifications:

Input: 12Vdc (9~30Vdc range )

Output: 48Vdc, 5A max, 240W

Dimension : 74*74*32mm 260g