One board in place of a switch, a recorder and a small server. Here is what that looks like in practice.
Five SATA ports, up to 16 PoE+ ports and your choice of compute module on one board.
Run the recorder on your own board. Video, storage and switching stay on your network, with no Exaviz account and no Exaviz cloud.
Start on a Raspberry Pi CM4, move to a CM5 on the same board, or fit a Banana Pi CM4 with its 5 TOPS NPU for AI on the module.
Read the post: One Board, Your Choice of Module: Interceptor with a CM4, CM5, or Banana Pi CM4
Five SATA ports and a Gigabit switch on one board, plus PoE+ for cameras, access points or sensors when you add one or two Interceptor PoE Boards.
A Gigabit PoE+ switch, 2.5GbE uplink, NVMe, SATA and an ESP32-C6 radio on one board for a Raspberry Pi CM5.
Switch, recorder storage and compute on one board. Plug cameras into the PoE+ ports, record to SATA or NVMe and run the VMS you choose.
Read the post: The DeskPi 2U Case: A Purpose-Built Home for the Cruiser
Put a Hailo-8 accelerator in the M.2 slot and run detection next to the cameras, on a Raspberry Pi CM5, without sending video off site.
A PoE+ switch, 2.5GbE uplink and mirrored storage in one mini-rack slot, powered from a single 48V supply.
Read the post: The Cruiser and the Mini Rack: One Board to Run It All